Expert EX-9132-2 Manual de usuario descargar pdf (Pagina 20)

□

Network link speed

Ethernet physical link speed. “Auto” means the speed is automatically

selected by the converter. You can also specify “10Mbps” or “100Mbps”

to match the speed of the HUB.

□

DHCP client

DHCP client mode could be enabled/disabled statues. If DHCP is enabled,

there should be a DHCP server on the network. If DHCP is disabled, [IP

address], [Subnet mask], and Gateway address] should be manually

assigned.

□

Socket port of HTTP setup

The socket port used to conduct the browser setup. Normally, HTTP

protocol use TCP port “80” for communication. If the field is changed to

“81”, the port “80” will be reserved for user's own Web.

To enter the browser setup page, “http://x.x.x.x

:81” should be typed for

socket port “81” and “http://x.x.x.x

” for socket port “80”, where “x.x.x.x” is

the converter’s IP address..

□

Socket port of serial I/O (RS-232/422/485)

□

Port number

A socket port assigned for the serial port. It’s a 16-bit number ,

ranging from 1 to 65535. Because the numbers below 1000 are

used for specific purposes (e.g. 80 is for HTTP protocol), we

suggest you use the numbers larger than 1000. Generally the

port number 4660 is used for the serial communication. However

you should specify different port number for each serial port.

□

Socket type

 TCP Server: TCP protocol, passive open, to be connected

from the TCP clients.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Sin comentarios

Expert EX-9132-2 Manual de usuario Pagina 20